At aseptic applications in the pharmacy and food sector, and also at production and processing of semiconductor products it is essential to remove adverse dusts and germs from the ambient air. Normally, special filters are used for this purpose. Over time, these are clogged by filtrated particles and have to be cleaned.
The problem:With the increasing contamination level of the filter, the pressure measuring instrument no longer indicates precisely. The pending cleaning of the filter always bears the risk that the dusts, which have already been filtrated from the air, could find their way back into the process environment. Furthermore, the dust/air mixture is often explosive and requires a pressure measuring instrument with approval for potentially explosive atmospheres.
Our solution:Despite its compact construction, our unilaterally mounted differential pressure transmitter has a diaphragm that allows for a high precision indication of lowest pressures even at increased pollution of the instrument. Shaking or blowing-out of the pressure measuring instrument is not necessary; therefore, there is no danger of re-contamination. The high soft membrane with trapezium shape, as well as our special filling technology, prevent temperature fluctuations from having effect on the measuring result. Thus, the intervals between the cleaning processes are prolonged and the downtimes are reduced.
The reference side of our differential pressure gauge allows for an affordable attachment at a streamlined position in the process via a hose. This connection can also be used for calibration purposes.
For operation in an intrinsically safe circuit, it has the ignition protection type Ex ia.
Our advantages at a glance:
- High-precision measuring results
- No shaking or blowing-out necessary
- Reduced downtimes
- Compact construction
- High soft membrane
Our instrument in detail:Compact and precise:
Differential pressure transmitter DiPTMEx with chemical seal
- Piezoresistive sensor
- 0 – 16 mbar to 0 – 25 bar
- Diaphragm: stainless steel 1.4435 (316 L)
- Case: stainless steel, degree of protection IP65
- Chemical seal with process connection Clamp ISO 2852, e.g. 2½" with 30 mm (1.18") tube
- Ex-Approval Marking
- II ½ G Ga/Gb Ex ia II C T4...T6
- I M1 Ex ia I
- II 1D Ex ia D20 T105 °C